If you’ve waxed your furniture and then decide you’d prefer a poly finish, remove the wax with mineral spirits (in a well ventilated area) before apply a water based poly. Question I have a problem getting a nice finish on a few cherry bathroom cabinets (solid cherry legs, rails, and doors; veneer side panels). While a wax finish can go on any type of wood, avoid putting oil (or Danish oil) on aromatic cedar or any of the dalbergia woods (rosewood, cocobolo, tulipwood). They are lovely but typically show wear (fingerprints) and require semi-annual to annual maintenance. A Scotchbrite™ pad or fine steel wool makes a good applicator; then wipe with paper shop towels. Or add some artist pigment to add color to the finish. Also suitable for children s toys, cots, bassinets and playpens. Drying oils will change from liquid to a solid film when exposed to oxygen in the air. It is water based and I use a good normal paint brush to put it on. Additionally, once the wax is applied, no other current finish can be applied to the project to help protect the look of the wax finish. The oil helps bring out wood’s beauty, while the varnish resin offers somewhat more protection against chemicals, heat, scratches and stains than either oil or wax. You canapply wax overany other finish and it willgive the surface a soft sheen and smooth feel, but don't put other finishes over wax. This is important because shellac is the same, you apply it similar to oil and wax but it forms a top layer thats protective (just dont put alcohol on it) old time instrument makers do the french polishing method with this natural finish (made from the shells of the Lac bug!) Do a couple coats in a couple days buff it with 0000 grit steel wool and finish with minwax finishing wax. Your order will come with a return form with convenient instructions, or you may send your returns directly to Returns Department, Rockler Woodworking and Hardware, 4365 Willow Drive, Medina, MN 55340. January 14, 2008. Sold in liquid, paste, and solid stick forms, waxes are formulated in a host of colors. Holding the brush at a slight angle to the surface, very lightly stroke the surface of the varnish to remove brush marks and even the surface. Liquid or paste wax typically contains some solvent, and the wax “cures” as the solvent evaporates. A wax finish is not a "forever" finish. Step 1: If you didn’t have to strip a finish off of your piece, go ahead and use a fine grit (like#220) sandpaper to polish your piece.Break down the edges for a more finished look. anyways. Also, a great deal of the rustic pine Mexican or hacienda-style furniture available in the Southwest U.S. is finished with paste wax. How Much Gap Should I Leave Around Cabinet Doors? If the surface is stained, wipe it down with oil soap. First of all, many older antiques were finished with wax, so a paste wax is the logical choice for refinishing such old projects. However, non-drying oils stay wet indefinitely, and they will wash off when the board is scrubbed with soap and water. Pound, Starting at Polyvine wax finish varnish in dead flat and satin finish is the best thing possible. You can apply wax over any other finish and it will give the surface a soft sheen and smooth feel, but don’t put other finishes over wax. Having that fresh luster in your house’s flooring can never be more satisfying with … However, the risk of a failure in recoating over a wax finish is high. Minwax Paste Finishing Wax over polyurethane works great as it adds luster to it and a fine new look. Sanding down the finish can drive the wax even deeper because the friction of sanding heats up the wax. Apply the wax with a clean cotton cloth wrapped around the fingers, much the way one applies a shoe polish to a pair of leather shoes. The nice thing about making your own is you can alter the recipe. After 10 minutes, wipe off everything that has not been absorbed. These woods contain an antioxidant that will prevent the oil from curing. A more practical use for paste wax for today's modern woodworker is to use it over an existing polyurethane, varnish, shellac, or lacquer finish, to give a piece an unmatched luster and shine. Minwax Soft Touch Finishing Wax protects bare and stained wood with a hand-rubbed matte finish that’s soft to the touch. Minwax® Paste Finishing Wax protects and adds hand-rubbed luster to any finished wood surface. Pint, Starting at Dye with water or alcohol dye and then vinyl sealer and topcoat. Other finishes contain chemicals that may be harmful to the environment, using a beeswax finish or timber wax provides a more natural way of finishing a floor.